SPECIAL INSTRUCTIONS

1. INSTRUCTIONS FOR POP CORN MACHINE.

•Turn all switches ON.

•For first batch only let kettle heat about 10 minutes.

•Add the oil and wait 4 minutes, after that add the corn.

•When corn is fully popped, dump kettle.

•Repeat the cycle until having enough and turn ON the light to keep them warm and turn OFF the heat button.

2. INSTRUCTIONS FOR COTTON CANDY MACHINE.

•Fill the spinner head with sugar but not to the top (just 70%).

•Manually turn head to balance out sugar.

•Turn ON both red buttons, and within few seconds it will start making floss.

•Please follow up on the quantity of sugar on the head to keep it always in a good level.

3. INSTRUCTIONS FOR SNOW CONE MACHINE.

•Load hopper with ice.

•Close pusher handle.

•Apply downward pressure on pusher handle while holding red button momentary shave ice switch.

•Do not lift the pusher handle until the shaver head is stopped.

4. INSTRUCTIONS FOR SKYLINE BAR.

•Get closer to the battery located in the bellow part of the bar and plug the cable of the grey box to the blue battery.

•Locate the remote control very close to it.

•Click the ON button, and then choose the color with the colored buttons on it.

5. INSTRUCTIONS FOR UPLIGHT FOR ACRYLIC.

•Turn ON using the remote control.

•Use the colors on the remote control to select the one of your choice. 

6. INSTRUCTIONS FOR UPLIGHT FOR COCKTAIL.

•Turn ON using the black switch located in one of the sides of the light.

•Use the button right next to the switch to change the color until the required one shows up.

•If you want to use the remote control, you must turn on the piece as explained before, and after that use the control to change colors.

7. INSTRUCTIONS FOR UPLIGHT VENUS.

•Plug the cable to the electric outlet.

•Press MENU button to select the type of light required.

•Use UP or DOWN buttons  to manage light intensity.

•After selecting the color, and intensity click ENTER button to have it set up in the way selected. 

8. INSTRUCTIONS FOR UPLIGHT WIRELESS.

•Press the ON button located behind the light.

•Press MENU button to select the type of light required.

•Use UP or DOWN buttons to manage light intensity.

•After selecting the color, and intensity click ENTER button to have it set up in the way selected.

•If you want to use the remote control, you must turn on the piece as explained before, and after that use the control to change colors.